dmesg - Intel Haswell Desktop
pci 0000:0a:00.0: reg 0x14: [mem 0xde040000-0xde040fff]
pci 0000:0a:00.0: enabling Extended Tags
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: bridge window [mem 0xde000000-0xde0fffff]
pci 0000:09:03.0: PCI bridge to [bus 0b-35]
pci 0000:09:03.0: bridge window [mem 0xc0000000-0xcfffffff]
pci 0000:09:03.0: bridge window [mem 0x80000000-0x9fffffff 64bit pref]
pci 0000:09:04.0: PCI bridge to [bus 36-3e]
pci 0000:09:05.0: PCI bridge to [bus 3f-69]
pci 0000:09:05.0: bridge window [mem 0xd0000000-0xddffffff]
pci 0000:09:05.0: bridge window [mem 0xa0000000-0xb9ffffff 64bit pref]
pci 0000:09:06.0: PCI bridge to [bus 6a-72]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 10 *11 12 14 15)
initcall acpi_init+0x0/0x32c returned 0 after 97614 usecs
calling pnp_init+0x0/0xc @ 1
initcall pnp_init+0x0/0xc returned 0 after 0 usecs
calling misc_init+0x0/0xbd @ 1
initcall misc_init+0x0/0xbd returned 0 after 0 usecs
calling cn_init+0x0/0xc0 @ 1
initcall cn_init+0x0/0xc0 returned 0 after 0 usecs
calling dax_fs_init+0x0/0xc5 @ 1
initcall dax_fs_init+0x0/0xc5 returned 0 after 0 usecs
calling dax_init+0x0/0x31 @ 1
initcall dax_init+0x0/0x31 returned 0 after 0 usecs
calling dma_buf_init+0x0/0xb0 @ 1
initcall dma_buf_init+0x0/0xb0 returned 0 after 0 usecs
calling init_scsi+0x0/0x77 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x77 returned 0 after 0 usecs
calling ata_init+0x0/0x2df @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x2df returned 0 after 5 usecs
calling vga_arb_device_init+0x0/0x223 @ 1
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x223 returned 0 after 6 usecs
calling usb_init+0x0/0x168 @ 1
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x168 returned 0 after 22 usecs
calling serio_init+0x0/0x29 @ 1
initcall serio_init+0x0/0x29 returned 0 after 2 usecs
calling input_init+0x0/0x100 @ 1
initcall input_init+0x0/0x100 returned 0 after 2 usecs
calling rtc_init+0x0/0x4e @ 1
initcall rtc_init+0x0/0x4e returned 0 after 1 usecs
calling dw_i2c_init_driver+0x0/0xe @ 1
initcall dw_i2c_init_driver+0x0/0xe returned 0 after 4 usecs
calling pps_init+0x0/0xad @ 1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
initcall pps_init+0x0/0xad returned 0 after 2 usecs
calling ptp_init+0x0/0x9c @ 1
PTP clock support registered
initcall ptp_init+0x0/0x9c returned 0 after 1 usecs
calling power_supply_class_init+0x0/0x41 @ 1
initcall power_supply_class_init+0x0/0x41 returned 0 after 1 usecs
calling hwmon_init+0x0/0xcf @ 1
initcall hwmon_init+0x0/0xcf returned 0 after 2 usecs
calling md_init+0x0/0x16a @ 1
initcall md_init+0x0/0x16a returned 0 after 6 usecs
calling mmc_init+0x0/0x30 @ 1
initcall mmc_init+0x0/0x30 returned 0 after 0 usecs
calling leds_init+0x0/0x3d @ 1
initcall leds_init+0x0/0x3d returned 0 after 0 usecs
calling dmi_init+0x0/0x115 @ 1
initcall dmi_init+0x0/0x115 returned 0 after 0 usecs
calling efisubsys_init+0x0/0x28f @ 1
Registered efivars operations
initcall efisubsys_init+0x0/0x28f returned 0 after 23019 usecs
calling devfreq_init+0x0/0xac @ 1
initcall devfreq_init+0x0/0xac returned 0 after 5 usecs
calling devfreq_performance_init+0x0/0xc @ 1
initcall devfreq_performance_init+0x0/0xc returned 0 after 0 usecs
calling fpga_mgr_class_init+0x0/0x49 @ 1
FPGA manager framework
initcall fpga_mgr_class_init+0x0/0x49 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x64 @ 1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x481e0018-0x4bffffff]
e820: reserve RAM buffer [mem 0x481f1018-0x4bffffff]
e820: reserve RAM buffer [mem 0x4a5b2000-0x4bffffff]
e820: reserve RAM buffer [mem 0x4b4ce000-0x4bffffff]
e820: reserve RAM buffer [mem 0x64fc6000-0x67ffffff]
e820: reserve RAM buffer [mem 0x650bd000-0x67ffffff]
e820: reserve RAM buffer [mem 0x6a000000-0x6bffffff]
e820: reserve RAM buffer [mem 0x28fe00000-0x28fffffff]
initcall pci_subsys_init+0x0/0x64 returned 0 after 6676 usecs
calling proto_init+0x0/0xc @ 1
initcall proto_init+0x0/0xc returned 0 after 0 usecs
calling net_dev_init+0x0/0x1f4 @ 1
initcall net_dev_init+0x0/0x1f4 returned 0 after 43 usecs
calling neigh_init+0x0/0x86 @ 1
initcall neigh_init+0x0/0x86 returned 0 after 0 usecs
calling fib_notifier_init+0x0/0xc @ 1
initcall fib_notifier_init+0x0/0xc returned 0 after 0 usecs
calling fib_rules_init+0x0/0xb2 @ 1
initcall fib_rules_init+0x0/0xb2 returned 0 after 0 usecs
calling init_cgroup_netprio+0x0/0x11 @ 1
initcall init_cgroup_netprio+0x0/0x11 returned 0 after 0 usecs
calling pktsched_init+0x0/0x115 @ 1
initcall pktsched_init+0x0/0x115 returned 0 after 1 usecs
calling tc_filter_init+0x0/0x89 @ 1
initcall tc_filter_init+0x0/0x89 returned 0 after 2 usecs
calling tc_action_init+0x0/0x6f @ 1
initcall tc_action_init+0x0/0x6f returned 0 after 0 usecs
calling genl_init+0x0/0x35 @ 1
initcall genl_init+0x0/0x35 returned 0 after 2 usecs
calling ipv4_netfilter_init+0x0/0xc @ 1
initcall ipv4_netfilter_init+0x0/0xc returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x67 @ 1
initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs
calling wireless_nlevent_init+0x0/0x39 @ 1
initcall wireless_nlevent_init+0x0/0x39 returned 0 after 0 usecs
calling netlbl_init+0x0/0x78 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x78 returned 0 after 9 usecs
calling nmi_warning_debugfs+0x0/0x2a @ 1
initcall nmi_warning_debugfs+0x0/0x2a returned 0 after 1 usecs
calling save_microcode_in_initrd+0x0/0x57 @ 1
initcall save_microcode_in_initrd+0x0/0x57 returned 0 after 1 usecs
calling hpet_late_init+0x0/0x11a @ 1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
initcall hpet_late_init+0x0/0x11a returned 0 after 2305 usecs
calling init_amd_nbs+0x0/0xf7 @ 1
initcall init_amd_nbs+0x0/0xf7 returned 0 after 2 usecs
calling clocksource_done_booting+0x0/0x3f @ 1
clocksource: Switched to clocksource hpet
initcall clocksource_done_booting+0x0/0x3f returned 0 after 8 usecs
calling tracer_init_tracefs+0x0/0x18d @ 1
initcall tracer_init_tracefs+0x0/0x18d returned 0 after 2936 usecs
calling init_trace_printk_function_export+0x0/0x38 @ 1
initcall init_trace_printk_function_export+0x0/0x38 returned 0 after 1 usecs
calling event_trace_init+0x0/0x2e3 @ 1
initcall event_trace_init+0x0/0x2e3 returned 0 after 6010 usecs
calling bpf_init+0x0/0x49 @ 1
initcall bpf_init+0x0/0x49 returned 0 after 2 usecs
calling init_pipe_fs+0x0/0x46 @ 1
initcall init_pipe_fs+0x0/0x46 returned 0 after 4 usecs
calling cgroup_writeback_init+0x0/0x31 @ 1
initcall cgroup_writeback_init+0x0/0x31 returned 0 after 9 usecs
calling inotify_user_setup+0x0/0x4e @ 1
initcall inotify_user_setup+0x0/0x4e returned 0 after 0 usecs
calling eventpoll_init+0x0/0xaa @ 1
initcall eventpoll_init+0x0/0xaa returned 0 after 5 usecs
calling anon_inode_init+0x0/0x5a @ 1
initcall anon_inode_init+0x0/0x5a returned 0 after 2 usecs
calling init_dax_wait_table+0x0/0x41 @ 1
initcall init_dax_wait_table+0x0/0x41 returned 0 after 15 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 0 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
calling proc_consoles_init+0x0/0x22 @ 1
initcall proc_consoles_init+0x0/0x22 returned 0 after 0 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 0 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 0 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs
calling proc_page_init+0x0/0x59 @ 1
initcall proc_page_init+0x0/0x59 returned 0 after 0 usecs
calling init_ramfs_fs+0x0/0x1c @ 1
initcall init_ramfs_fs+0x0/0x1c returned 0 after 0 usecs
calling init_hugetlbfs_fs+0x0/0x13a @ 1
initcall init_hugetlbfs_fs+0x0/0x13a returned 0 after 11 usecs
calling blk_scsi_ioctl_init+0x0/0x38b @ 1
initcall blk_scsi_ioctl_init+0x0/0x38b returned 0 after 0 usecs
calling dynamic_debug_init_debugfs+0x0/0x6d @ 1
initcall dynamic_debug_init_debugfs+0x0/0x6d returned 0 after 2 usecs
calling acpi_event_init+0x0/0x2a @ 1
initcall acpi_event_init+0x0/0x2a returned 0 after 3 usecs
calling pnp_system_init+0x0/0xc @ 1
initcall pnp_system_init+0x0/0xc returned 0 after 4 usecs
calling pnpacpi_init+0x0/0x71 @ 1
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdffe0000-0xdffeffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
initcall pnpacpi_init+0x0/0x71 returned 0 after 1138 usecs
calling chr_dev_init+0x0/0xaf @ 1
initcall chr_dev_init+0x0/0xaf returned 0 after 960 usecs
calling firmware_class_init+0x0/0xc4 @ 1
initcall firmware_class_init+0x0/0xc4 returned 0 after 0 usecs
calling thermal_init+0x0/0xe0 @ 1
initcall thermal_init+0x0/0xe0 returned 0 after 5 usecs
calling cpufreq_gov_performance_init+0x0/0xc @ 1
initcall cpufreq_gov_performance_init+0x0/0xc returned 0 after 0 usecs
calling map_properties+0x0/0x524 @ 1
initcall map_properties+0x0/0x524 returned 0 after 0 usecs
calling init_acpi_pm_clocksource+0x0/0xdc @ 1
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
initcall init_acpi_pm_clocksource+0x0/0xdc returned 0 after 4409 usecs
calling pcibios_assign_resources+0x0/0xc3 @ 1
pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:03:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:03:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-06] add_size 1000
pci 0000:02:00.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 03-06] add_size 200000 add_align 100000
pci 0000:02:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 03-06] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02-06] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 02-06] add_size 200000 add_align 100000
pci 0000:09:00.0: bridge window [io 0x1000-0x0fff] to [bus 0a] add_size 1000
pci 0000:09:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a] add_size 200000 add_align 100000
pci 0000:09:03.0: bridge window [io 0x1000-0x0fff] to [bus 0b-35] add_size 1000
pci 0000:09:04.0: bridge window [io 0x1000-0x0fff] to [bus 36-3e] add_size 1000
pci 0000:09:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 36-3e] add_size 200000 add_align 100000
pci 0000:09:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 36-3e] add_size 200000 add_align 100000
pci 0000:09:05.0: bridge window [io 0x1000-0x0fff] to [bus 3f-69] add_size 1000
pci 0000:09:06.0: bridge window [io 0x1000-0x0fff] to [bus 6a-72] add_size 1000
pci 0000:09:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6a-72] add_size 200000 add_align 100000
pci 0000:09:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 6a-72] add_size 200000 add_align 100000
pci 0000:08:00.0: bridge window [io 0x1000-0x0fff] to [bus 09-72] add_size 5000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 08-72] add_size 5000
pci 0000:00:1c.2: BAR 15: assigned [mem 0x6f200000-0x6f4fffff 64bit pref]
pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x7fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: BAR 14: no space for [mem size 0x00300000]
pci 0000:02:00.0: BAR 14: failed to assign [mem size 0x00300000]
pci 0000:02:00.0: BAR 15: assigned [mem 0x6f200000-0x6f4fffff 64bit pref]
pci 0000:02:00.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:02:00.0: BAR 14: no space for [mem size 0x00100000]
pci 0000:02:00.0: BAR 14: failed to assign [mem size 0x00100000]
pci 0000:03:01.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:03:01.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:03:01.0: BAR 15: assigned [mem 0x6f200000-0x6f3fffff 64bit pref]
pci 0000:03:01.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:03:01.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:03:01.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:03:01.0: PCI bridge to [bus 04]
pci 0000:03:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:03:01.0: bridge window [mem 0x6f200000-0x6f3fffff 64bit pref]
pci 0000:03:02.0: PCI bridge to [bus 05]
pci 0000:03:03.0: PCI bridge to [bus 06]
pci 0000:02:00.0: PCI bridge to [bus 03-06]
pci 0000:02:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:02:00.0: bridge window [mem 0x6f200000-0x6f4fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02-06]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xde900000-0xde9fffff]
pci 0000:00:1c.2: bridge window [mem 0x6f200000-0x6f4fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xde800000-0xde8fffff]
pci 0000:08:00.0: BAR 13: assigned [io 0x3000-0x7fff]
pci 0000:09:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:04.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:09:04.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:09:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:06.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:09:06.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:09:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:00.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:09:03.0: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:09:04.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:09:05.0: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:09:06.0: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:09:06.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:09:06.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:09:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:04.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:09:04.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:09:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:09:00.0: bridge window [mem 0xde000000-0xde0fffff]
pci 0000:09:03.0: PCI bridge to [bus 0b-35]
pci 0000:09:03.0: bridge window [io 0x4000-0x4fff]
pci 0000:09:03.0: bridge window [mem 0xc0000000-0xcfffffff]
pci 0000:09:03.0: bridge window [mem 0x80000000-0x9fffffff 64bit pref]
pci 0000:09:04.0: PCI bridge to [bus 36-3e]
pci 0000:09:04.0: bridge window [io 0x5000-0x5fff]
pci 0000:09:05.0: PCI bridge to [bus 3f-69]
pci 0000:09:05.0: bridge window [io 0x6000-0x6fff]
pci 0000:09:05.0: bridge window [mem 0xd0000000-0xddffffff]
pci 0000:09:05.0: bridge window [mem 0xa0000000-0xb9ffffff 64bit pref]
pci 0000:09:06.0: PCI bridge to [bus 6a-72]
pci 0000:09:06.0: bridge window [io 0x7000-0x7fff]
pci 0000:08:00.0: PCI bridge to [bus 09-72]
pci 0000:08:00.0: bridge window [io 0x3000-0x7fff]
pci 0000:08:00.0: bridge window [mem 0xc0000000-0xde0fffff]
pci 0000:08:00.0: bridge window [mem 0x80000000-0xb9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-72]
pci 0000:00:1c.4: bridge window [io 0x3000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xde0fffff]
pci 0000:00:1c.4: bridge window [mem 0x80000000-0xb9ffffff 64bit pref]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x6f200000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xde900000-0xde9fffff]
pci_bus 0000:02: resource 2 [mem 0x6f200000-0x6f4fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 2 [mem 0x6f200000-0x6f4fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 2 [mem 0x6f200000-0x6f3fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xde800000-0xde8fffff]
pci_bus 0000:08: resource 0 [io 0x3000-0x7fff]
pci_bus 0000:08: resource 1 [mem 0xc0000000-0xde0fffff]
pci_bus 0000:08: resource 2 [mem 0x80000000-0xb9ffffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x3000-0x7fff]
pci_bus 0000:09: resource 1 [mem 0xc0000000-0xde0fffff]
pci_bus 0000:09: resource 2 [mem 0x80000000-0xb9ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0a: resource 1 [mem 0xde000000-0xde0fffff]
pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xcfffffff]
pci_bus 0000:0b: resource 2 [mem 0x80000000-0x9fffffff 64bit pref]
pci_bus 0000:36: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:3f: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:3f: resource 1 [mem 0xd0000000-0xddffffff]
pci_bus 0000:3f: resource 2 [mem 0xa0000000-0xb9ffffff 64bit pref]
pci_bus 0000:6a: resource 0 [io 0x7000-0x7fff]
initcall pcibios_assign_resources+0x0/0xc3 returned 0 after 514 usecs
calling sysctl_core_init+0x0/0x26 @ 1
initcall sysctl_core_init+0x0/0x26 returned 0 after 7 usecs
calling eth_offload_init+0x0/0x11 @ 1
initcall eth_offload_init+0x0/0x11 returned 0 after 0 usecs
calling inet_init+0x0/0x268 @ 1
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
initcall inet_init+0x0/0x268 returned 0 after 339 usecs
calling ipv4_offload_init+0x0/0x73 @ 1
initcall ipv4_offload_init+0x0/0x73 returned 0 after 0 usecs
calling af_unix_init+0x0/0x4d @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4d returned 0 after 2 usecs
calling ipv6_offload_init+0x0/0x7e @ 1
initcall ipv6_offload_init+0x0/0x7e returned 0 after 0 usecs
calling pci_apply_final_quirks+0x0/0xfd @ 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 128), using 64 bytes
initcall pci_apply_final_quirks+0x0/0xfd returned 0 after 31414 usecs
calling acpi_reserve_resources+0x0/0xec @ 1
initcall acpi_reserve_resources+0x0/0xec returned 0 after 0 usecs
calling populate_rootfs+0x0/0xaa @ 1
initcall populate_rootfs+0x0/0xaa returned 0 after 19 usecs
calling pci_iommu_init+0x0/0x3a @ 1
DMAR: No ATSR found
DMAR: dmar1: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:14.0 [0x69e76000 - 0x69e84fff]
DMAR: Setting identity map for device 0000:00:1a.0 [0x69e76000 - 0x69e84fff]
DMAR: Setting identity map for device 0000:00:1d.0 [0x69e76000 - 0x69e84fff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:03.0 to group 1
iommu: Adding device 0000:00:14.0 to group 2
iommu: Adding device 0000:00:16.0 to group 3
iommu: Adding device 0000:00:19.0 to group 4
iommu: Adding device 0000:00:1a.0 to group 5
iommu: Adding device 0000:00:1b.0 to group 6
iommu: Adding device 0000:00:1c.0 to group 7
iommu: Adding device 0000:00:1c.2 to group 8
iommu: Adding device 0000:00:1c.3 to group 9
iommu: Adding device 0000:00:1c.4 to group 10
iommu: Adding device 0000:00:1d.0 to group 11
iommu: Adding device 0000:00:1f.0 to group 12
iommu: Adding device 0000:00:1f.2 to group 12
iommu: Adding device 0000:00:1f.3 to group 12
iommu: Adding device 0000:02:00.0 to group 13
iommu: Adding device 0000:03:01.0 to group 14
iommu: Adding device 0000:03:02.0 to group 15
iommu: Adding device 0000:03:03.0 to group 16
iommu: Adding device 0000:07:00.0 to group 17
iommu: Adding device 0000:08:00.0 to group 18
iommu: Adding device 0000:09:00.0 to group 19
iommu: Adding device 0000:09:03.0 to group 20
iommu: Adding device 0000:09:04.0 to group 21
iommu: Adding device 0000:09:05.0 to group 22
iommu: Adding device 0000:09:06.0 to group 23
iommu: Adding device 0000:0a:00.0 to group 19
initcall pci_iommu_init+0x0/0x3a returned 0 after 1223 usecs
calling ir_dev_scope_init+0x0/0x30 @ 1
initcall ir_dev_scope_init+0x0/0x30 returned 0 after 0 usecs
calling ia32_binfmt_init+0x0/0x11 @ 1
initcall ia32_binfmt_init+0x0/0x11 returned 0 after 1 usecs
calling amd_uncore_init+0x0/0x27e @ 1
initcall amd_uncore_init+0x0/0x27e returned -19 after 0 usecs
calling amd_ibs_init+0x0/0x1b0 @ 1
initcall amd_ibs_init+0x0/0x1b0 returned -19 after 0 usecs
calling msr_init+0x0/0xd3 @ 1
initcall msr_init+0x0/0xd3 returned 0 after 1 usecs
calling rapl_pmu_init+0x0/0x239 @ 1
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
initcall rapl_pmu_init+0x0/0x239 returned 0 after 56 usecs
calling intel_uncore_init+0x0/0x252 @ 1
initcall intel_uncore_init+0x0/0x252 returned 0 after 83 usecs
calling cstate_pmu_init+0x0/0x1ad @ 1
initcall cstate_pmu_init+0x0/0x1ad returned 0 after 47 usecs
calling vmx_init+0x0/0x18 @ 1
initcall vmx_init+0x0/0x18 returned 0 after 127 usecs
calling register_kernel_offset_dumper+0x0/0x1a @ 1
initcall register_kernel_offset_dumper+0x0/0x1a returned 0 after 0 usecs
calling i8259A_init_ops+0x0/0x1e @ 1
initcall i8259A_init_ops+0x0/0x1e returned 0 after 0 usecs
calling init_tsc_clocksource+0x0/0xcc @ 1
initcall init_tsc_clocksource+0x0/0xcc returned 0 after 0 usecs
calling add_rtc_cmos+0x0/0xc8 @ 1
initcall add_rtc_cmos+0x0/0xc8 returned 0 after 0 usecs
calling i8237A_init_ops+0x0/0x11 @ 1
initcall i8237A_init_ops+0x0/0x11 returned 0 after 1 usecs
calling thermal_throttle_init_device+0x0/0x4b @ 1
initcall thermal_throttle_init_device+0x0/0x4b returned 0 after 60 usecs
calling msr_init+0x0/0xde @ 1
initcall msr_init+0x0/0xde returned 0 after 221 usecs
calling cpuid_init+0x0/0xde @ 1
initcall cpuid_init+0x0/0xde returned 0 after 172 usecs
calling ioapic_init_ops+0x0/0x11 @ 1
initcall ioapic_init_ops+0x0/0x11 returned 0 after 0 usecs
calling start_periodic_check_for_corruption+0x0/0x60 @ 1
initcall start_periodic_check_for_corruption+0x0/0x60 returned 0 after 0 usecs
calling sysfb_init+0x0/0x7b @ 1
initcall sysfb_init+0x0/0x7b returned 0 after 9 usecs
calling aes_init+0x0/0xc @ 1
alg: self-tests disabled
initcall aes_init+0x0/0xc returned 0 after 26 usecs
calling init+0x0/0x42 @ 1
initcall init+0x0/0x42 returned 0 after 129 usecs
calling crc32c_intel_mod_init+0x0/0x51 @ 1
initcall crc32c_intel_mod_init+0x0/0x51 returned 0 after 20 usecs
calling sha256_ssse3_mod_init+0x0/0xe7 @ 1
initcall sha256_ssse3_mod_init+0x0/0xe7 returned 0 after 121 usecs
calling sha512_ssse3_mod_init+0x0/0xac @ 1
initcall sha512_ssse3_mod_init+0x0/0xac returned 0 after 121 usecs
calling camellia_aesni_init+0x0/0x7a @ 1
initcall camellia_aesni_init+0x0/0x7a returned 0 after 202 usecs
calling serpent_init+0x0/0x40 @ 1
initcall serpent_init+0x0/0x40 returned 0 after 211 usecs
calling camellia_aesni_init+0x0/0x88 @ 1
initcall camellia_aesni_init+0x0/0x88 returned 0 after 207 usecs
calling init+0x0/0x6e @ 1
initcall init+0x0/0x6e returned 0 after 206 usecs
calling iosf_mbi_init+0x0/0x15 @ 1
initcall iosf_mbi_init+0x0/0x15 returned 0 after 6 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 0 usecs
calling register_warn_debugfs+0x0/0x2a @ 1
initcall register_warn_debugfs+0x0/0x2a returned 0 after 0 usecs
calling cpuhp_sysfs_init+0x0/0x6c @ 1
initcall cpuhp_sysfs_init+0x0/0x6c returned 0 after 9 usecs
calling ioresources_init+0x0/0x39 @ 1
initcall ioresources_init+0x0/0x39 returned 0 after 1 usecs
calling init_sched_debug_procfs+0x0/0x2c @ 1
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 usecs
calling irq_pm_init_ops+0x0/0x11 @ 1
initcall irq_pm_init_ops+0x0/0x11 returned 0 after 0 usecs
calling timekeeping_init_ops+0x0/0x11 @ 1
initcall timekeeping_init_ops+0x0/0x11 returned 0 after 0 usecs
calling init_clocksource_sysfs+0x0/0x68 @ 1
initcall init_clocksource_sysfs+0x0/0x68 returned 0 after 13 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 usecs
calling alarmtimer_init+0x0/0x112 @ 1
initcall alarmtimer_init+0x0/0x112 returned 0 after 13 usecs
calling init_posix_timers+0x0/0x30 @ 1
initcall init_posix_timers+0x0/0x30 returned 0 after 3 usecs
calling clockevents_init_sysfs+0x0/0xc8 @ 1
initcall clockevents_init_sysfs+0x0/0xc8 returned 0 after 50 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 0 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs
calling pid_namespaces_init+0x0/0x46 @ 1
initcall pid_namespaces_init+0x0/0x46 returned 0 after 4 usecs
calling seccomp_sysctl_init+0x0/0x2b @ 1
initcall seccomp_sysctl_init+0x0/0x2b returned 0 after 2 usecs
calling utsname_sysctl_init+0x0/0x11 @ 1
initcall utsname_sysctl_init+0x0/0x11 returned 0 after 2 usecs
calling init_tracepoints+0x0/0x25 @ 1
initcall init_tracepoints+0x0/0x25 returned 0 after 0 usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 0 usecs
calling init_blk_tracer+0x0/0x53 @ 1
initcall init_blk_tracer+0x0/0x53 returned 0 after 4 usecs
calling perf_event_sysfs_init+0x0/0x8a @ 1
initcall perf_event_sysfs_init+0x0/0x8a returned 0 after 103 usecs
calling padata_driver_init+0x0/0x42 @ 1
initcall padata_driver_init+0x0/0x42 returned 0 after 0 usecs
calling system_trusted_keyring_init+0x0/0x6a @ 1
Initialise system trusted keyrings
initcall system_trusted_keyring_init+0x0/0x6a returned 0 after 2 usecs
calling kswapd_init+0x0/0x8e @ 1
initcall kswapd_init+0x0/0x8e returned 0 after 15 usecs
calling extfrag_debug_init+0x0/0x7e @ 1
initcall extfrag_debug_init+0x0/0x7e returned 0 after 2 usecs
calling mm_compute_batch_init+0x0/0x16 @ 1
initcall mm_compute_batch_init+0x0/0x16 returned 0 after 0 usecs
calling slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after 0 usecs
calling workingset_init+0x0/0x85 @ 1
workingset: timestamp_bits=44 max_order=21 bucket_order=0
initcall workingset_init+0x0/0x85 returned 0 after 1 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 0 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 0 usecs
calling slab_proc_init+0x0/0x3 @ 1
initcall slab_proc_init+0x0/0x3 returned 0 after 0 usecs
calling cpucache_init+0x0/0x48 @ 1
initcall cpucache_init+0x0/0x48 returned 0 after 46 usecs
calling fcntl_init+0x0/0x30 @ 1
initcall fcntl_init+0x0/0x30 returned 0 after 0 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 1 usecs
calling start_dirtytime_writeback+0x0/0x2d @ 1
initcall start_dirtytime_writeback+0x0/0x2d returned 0 after 0 usecs
calling blkdev_init+0x0/0x2b @ 1
initcall blkdev_init+0x0/0x2b returned 0 after 2 usecs
calling dio_init+0x0/0x33 @ 1
initcall dio_init+0x0/0x33 returned 0 after 3 usecs
calling dnotify_init+0x0/0x7f @ 1
initcall dnotify_init+0x0/0x7f returned 0 after 0 usecs
calling fanotify_user_setup+0x0/0x58 @ 1
initcall fanotify_user_setup+0x0/0x58 returned 0 after 0 usecs
calling aio_setup+0x0/0xa7 @ 1
initcall aio_setup+0x0/0xa7 returned 0 after 5 usecs
calling init_sys32_ioctl+0x0/0x2e @ 1
initcall init_sys32_ioctl+0x0/0x2e returned 0 after 125 usecs
calling mbcache_init+0x0/0x37 @ 1
initcall mbcache_init+0x0/0x37 returned 0 after 2 usecs
calling init_devpts_fs+0x0/0x25 @ 1
initcall init_devpts_fs+0x0/0x25 returned 0 after 3 usecs
calling ext4_init_fs+0x0/0x1a6 @ 1
initcall ext4_init_fs+0x0/0x1a6 returned 0 after 14 usecs
calling journal_init+0x0/0x112 @ 1
initcall journal_init+0x0/0x112 returned 0 after 12 usecs
calling init_fat_fs+0x0/0x50 @ 1
initcall init_fat_fs+0x0/0x50 returned 0 after 3 usecs
calling init_vfat_fs+0x0/0xc @ 1
initcall init_vfat_fs+0x0/0xc returned 0 after 0 usecs
calling init_nls_cp437+0x0/0xe @ 1
initcall init_nls_cp437+0x0/0xe returned 0 after 0 usecs
calling init_nls_ascii+0x0/0xe @ 1
initcall init_nls_ascii+0x0/0xe returned 0 after 0 usecs
calling init_nls_iso8859_1+0x0/0xe @ 1
initcall init_nls_iso8859_1+0x0/0xe returned 0 after 0 usecs
calling init_nls_utf8+0x0/0x21 @ 1
initcall init_nls_utf8+0x0/0x21 returned 0 after 0 usecs
calling init_autofs4_fs+0x0/0x23 @ 1
initcall init_autofs4_fs+0x0/0x23 returned 0 after 17 usecs
calling ovl_init+0x0/0x5e @ 1
initcall ovl_init+0x0/0x5e returned 0 after 1 usecs
calling init_xfs_fs+0x0/0x1a1 @ 1
SGI XFS with ACLs, security attributes, realtime, no debug enabled
initcall init_xfs_fs+0x0/0x1a1 returned 0 after 97 usecs
calling init_pstore_fs+0x0/0x49 @ 1
initcall init_pstore_fs+0x0/0x49 returned 0 after 0 usecs
calling efivarfs_init+0x0/0x29 @ 1
initcall efivarfs_init+0x0/0x29 returned 0 after 0 usecs
calling ipc_init+0x0/0x4b @ 1
initcall ipc_init+0x0/0x4b returned 0 after 2 usecs
calling ipc_sysctl_init+0x0/0x11 @ 1
initcall ipc_sysctl_init+0x0/0x11 returned 0 after 4 usecs
calling init_mqueue_fs+0x0/0xf6 @ 1
initcall init_mqueue_fs+0x0/0xf6 returned 0 after 9 usecs
calling key_proc_init+0x0/0x5b @ 1
initcall key_proc_init+0x0/0x5b returned 0 after 1 usecs
calling crypto_algapi_init+0x0/0x8 @ 1
initcall crypto_algapi_init+0x0/0x8 returned 0 after 0 usecs
calling seqiv_module_init+0x0/0xc @ 1
initcall seqiv_module_init+0x0/0xc returned 0 after 0 usecs
calling echainiv_module_init+0x0/0xc @ 1
initcall echainiv_module_init+0x0/0xc returned 0 after 0 usecs
calling rsa_init+0x0/0x50 @ 1
initcall rsa_init+0x0/0x50 returned 0 after 21 usecs
calling hmac_module_init+0x0/0xc @ 1
initcall hmac_module_init+0x0/0xc returned 0 after 0 usecs
calling crypto_null_mod_init+0x0/0x47 @ 1
initcall crypto_null_mod_init+0x0/0x47 returned 0 after 81 usecs
calling md5_mod_init+0x0/0xc @ 1
initcall md5_mod_init+0x0/0xc returned 0 after 19 usecs
calling sha1_generic_mod_init+0x0/0xc @ 1
initcall sha1_generic_mod_init+0x0/0xc returned 0 after 19 usecs
calling sha256_generic_mod_init+0x0/0x11 @ 1
initcall sha256_generic_mod_init+0x0/0x11 returned 0 after 40 usecs
calling sha512_generic_mod_init+0x0/0x11 @ 1
initcall sha512_generic_mod_init+0x0/0x11 returned 0 after 41 usecs
calling crypto_ecb_module_init+0x0/0xc @ 1
initcall crypto_ecb_module_init+0x0/0xc returned 0 after 0 usecs
calling crypto_cbc_module_init+0x0/0xc @ 1
initcall crypto_cbc_module_init+0x0/0xc returned 0 after 0 usecs
calling crypto_module_init+0x0/0xc @ 1
initcall crypto_module_init+0x0/0xc returned 0 after 0 usecs
calling crypto_module_init+0x0/0xc @ 1
initcall crypto_module_init+0x0/0xc returned 0 after 0 usecs
calling crypto_ctr_module_init+0x0/0x39 @ 1
initcall crypto_ctr_module_init+0x0/0x39 returned 0 after 0 usecs
calling crypto_ccm_module_init+0x0/0x73 @ 1
initcall crypto_ccm_module_init+0x0/0x73 returned 0 after 0 usecs
calling serpent_mod_init+0x0/0x11 @ 1
initcall serpent_mod_init+0x0/0x11 returned 0 after 39 usecs
calling aes_init+0x0/0xc @ 1
initcall aes_init+0x0/0xc returned 0 after 19 usecs
calling aes_init+0x0/0xc @ 1
initcall aes_init+0x0/0xc returned 0 after 19 usecs
calling arc4_init+0x0/0x11 @ 1
initcall arc4_init+0x0/0x11 returned 0 after 40 usecs
calling deflate_mod_init+0x0/0x3e @ 1
initcall deflate_mod_init+0x0/0x3e returned 0 after 59 usecs
calling crc32c_mod_init+0x0/0xc @ 1
initcall crc32c_mod_init+0x0/0xc returned 0 after 20 usecs
calling crct10dif_mod_init+0x0/0xc @ 1
initcall crct10dif_mod_init+0x0/0xc returned 0 after 20 usecs
calling drbg_init+0x0/0x1cc @ 1
initcall drbg_init+0x0/0x1cc returned 0 after 161 usecs
calling jent_mod_init+0x0/0x2d @ 1
initcall jent_mod_init+0x0/0x2d returned 0 after 120 usecs
calling af_alg_init+0x0/0x3d @ 1
NET: Registered protocol family 38
initcall af_alg_init+0x0/0x3d returned 0 after 0 usecs
calling algif_hash_init+0x0/0xc @ 1
initcall algif_hash_init+0x0/0xc returned 0 after 0 usecs
calling algif_skcipher_init+0x0/0xc @ 1
initcall algif_skcipher_init+0x0/0xc returned 0 after 0 usecs
calling asymmetric_key_init+0x0/0xc @ 1
Key type asymmetric registered
initcall asymmetric_key_init+0x0/0xc returned 0 after 0 usecs
calling x509_key_init+0x0/0xc @ 1
Asymmetric key parser 'x509' registered
initcall x509_key_init+0x0/0xc returned 0 after 0 usecs
calling proc_genhd_init+0x0/0x39 @ 1
initcall proc_genhd_init+0x0/0x39 returned 0 after 1 usecs
calling bsg_init+0x0/0x16f @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
initcall bsg_init+0x0/0x16f returned 0 after 4 usecs
calling throtl_init+0x0/0x3c @ 1
initcall throtl_init+0x0/0x3c returned 0 after 21 usecs
calling noop_init+0x0/0xc @ 1
io scheduler noop registered
initcall noop_init+0x0/0xc returned 0 after 0 usecs
calling deadline_init+0x0/0xc @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0xc returned 0 after 0 usecs
calling cfq_init+0x0/0x7a @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x7a returned 0 after 7 usecs
calling kyber_init+0x0/0xc @ 1
io scheduler kyber registered
initcall kyber_init+0x0/0xc returned 0 after 0 usecs
calling bfq_init+0x0/0xb1 @ 1
io scheduler bfq registered
initcall bfq_init+0x0/0xb1 returned 0 after 3 usecs
calling crc_t10dif_mod_init+0x0/0x3f @ 1
initcall crc_t10dif_mod_init+0x0/0x3f returned 0 after 1 usecs
calling libcrc32c_mod_init+0x0/0x2c @ 1
initcall libcrc32c_mod_init+0x0/0x2c returned 0 after 0 usecs
calling percpu_counter_startup+0x0/0x5f @ 1
initcall percpu_counter_startup+0x0/0x5f returned 0 after 42 usecs
calling sg_pool_init+0x0/0xe4 @ 1
initcall sg_pool_init+0x0/0xe4 returned 0 after 2 usecs
calling phy_core_init+0x0/0x4c @ 1
initcall phy_core_init+0x0/0x4c returned 0 after 1 usecs
calling pci_proc_init+0x0/0x69 @ 1
initcall pci_proc_init+0x0/0x69 returned 0 after 15 usecs
calling pcie_portdrv_init+0x0/0x70 @ 1
pci_bus 0000:09: Allocating resources
pci 0000:09:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a] add_size 200000 add_align 100000
pci 0000:09:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 36-3e] add_size 200000 add_align 100000
pci 0000:09:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 36-3e] add_size 200000 add_align 100000
pci 0000:09:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6a-72] add_size 200000 add_align 100000
pci 0000:09:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 6a-72] add_size 200000 add_align 100000
pcieport 0000:08:00.0: enabling device (0006 -> 0007)
pci 0000:09:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:04.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:09:04.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:09:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:06.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:09:06.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:09:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:06.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:09:06.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:09:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:04.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:09:04.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:09:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:09:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:09:00.0: bridge window [mem 0xde000000-0xde0fffff]
pci 0000:09:03.0: PCI bridge to [bus 0b-35]
pci 0000:09:03.0: bridge window [io 0x4000-0x4fff]
pci 0000:09:03.0: bridge window [mem 0xc0000000-0xcfffffff]
pci 0000:09:03.0: bridge window [mem 0x80000000-0x9fffffff 64bit pref]
pci 0000:09:04.0: PCI bridge to [bus 36-3e]
pci 0000:09:04.0: bridge window [io 0x5000-0x5fff]
pci 0000:09:05.0: PCI bridge to [bus 3f-69]
pci 0000:09:05.0: bridge window [io 0x6000-0x6fff]
pci 0000:09:05.0: bridge window [mem 0xd0000000-0xddffffff]
pci 0000:09:05.0: bridge window [mem 0xa0000000-0xb9ffffff 64bit pref]
pci 0000:09:06.0: PCI bridge to [bus 6a-72]
pci 0000:09:06.0: bridge window [io 0x7000-0x7fff]
pcieport 0000:09:00.0: enabling device (0006 -> 0007)
pcieport 0000:09:03.0: enabling device (0006 -> 0007)
pcieport 0000:09:04.0: enabling device (0006 -> 0007)
pcieport 0000:09:05.0: enabling device (0006 -> 0007)
pcieport 0000:09:06.0: enabling device (0006 -> 0007)
initcall pcie_portdrv_init+0x0/0x70 returned 0 after 2164 usecs
calling pcie_pme_service_init+0x0/0xc @ 1
initcall pcie_pme_service_init+0x0/0xc returned 0 after 2 usecs
calling pci_hotplug_init+0x0/0x3 @ 1
initcall pci_hotplug_init+0x0/0x3 returned 0 after 0 usecs
calling pcied_init+0x0/0x57 @ 1
initcall pcied_init+0x0/0x57 returned 0 after 2 usecs
calling pci_stub_init+0x0/0x14c @ 1
initcall pci_stub_init+0x0/0x14c returned 0 after 3 usecs
calling pci_ep_cfs_init+0x0/0xcf @ 1
initcall pci_ep_cfs_init+0x0/0xcf returned 0 after 7 usecs
calling pci_epc_init+0x0/0x43 @ 1
initcall pci_epc_init+0x0/0x43 returned 0 after 1 usecs
calling pci_epf_init+0x0/0x29 @ 1
initcall pci_epf_init+0x0/0x29 returned 0 after 3 usecs
calling efifb_driver_init+0x0/0xe @ 1
efifb: probing for efifb
efifb: framebuffer at 0x70000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
initcall efifb_driver_init+0x0/0xe returned 0 after 1839 usecs
calling intel_idle_init+0x0/0x172 @ 1
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
initcall intel_idle_init+0x0/0x172 returned 0 after 181 usecs
calling acpi_button_driver_init+0x0/0xc @ 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
initcall acpi_button_driver_init+0x0/0xc returned 0 after 99 usecs
calling acpi_fan_driver_init+0x0/0xe @ 1
initcall acpi_fan_driver_init+0x0/0xe returned 0 after 155 usecs
calling acpi_video_init+0x0/0x81 @ 1
initcall acpi_video_init+0x0/0x81 returned 0 after 2 usecs
calling acpi_processor_driver_init+0x0/0xa1 @ 1
initcall acpi_processor_driver_init+0x0/0xa1 returned 0 after 172 usecs
calling acpi_thermal_init+0x0/0x85 @ 1
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
initcall acpi_thermal_init+0x0/0x85 returned 0 after 597 usecs
calling acpi_ec_sys_init+0x0/0xfe @ 1
initcall acpi_ec_sys_init+0x0/0xfe returned -19 after 0 usecs
calling acpi_pad_init+0x0/0xc3 @ 1
initcall acpi_pad_init+0x0/0xc3 returned 0 after 18 usecs
calling erst_init+0x0/0x2f4 @ 1
initcall erst_init+0x0/0x2f4 returned 0 after 0 usecs
calling gpio_clk_driver_init+0x0/0xe @ 1
initcall gpio_clk_driver_init+0x0/0xe returned 0 after 3 usecs
calling plt_clk_driver_init+0x0/0xe @ 1
initcall plt_clk_driver_init+0x0/0xe returned 0 after 2 usecs
calling ioat_init_module+0x0/0xb7 @ 1
ioatdma: Intel(R) QuickData Technology Driver 4.00
initcall ioat_init_module+0x0/0xb7 returned 0 after 9 usecs
calling virtio_pci_driver_init+0x0/0x15 @ 1
initcall virtio_pci_driver_init+0x0/0x15 returned 0 after 4 usecs
calling n_null_init+0x0/0x1e @ 1
initcall n_null_init+0x0/0x1e returned 0 after 0 usecs
calling pty_init+0x0/0x1f2 @ 1
initcall pty_init+0x0/0x1f2 returned 0 after 18 usecs
calling sysrq_init+0x0/0x6f @ 1
initcall sysrq_init+0x0/0x6f returned 0 after 1 usecs
calling serial8250_init+0x0/0x15c @ 1
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
initcall serial8250_init+0x0/0x15c returned 0 after 20142 usecs
calling serial_pci_driver_init+0x0/0x15 @ 1
initcall serial_pci_driver_init+0x0/0x15 returned 0 after 11 usecs
calling ttyprintk_init+0x0/0x105 @ 1
initcall ttyprintk_init+0x0/0x105 returned 0 after 18 usecs
calling init+0x0/0xfe @ 1
initcall init+0x0/0xfe returned 0 after 7 usecs
calling hpet_init+0x0/0x62 @ 1
initcall hpet_init+0x0/0x62 returned 0 after 85 usecs
calling hwrng_modinit+0x0/0x7e @ 1
initcall hwrng_modinit+0x0/0x7e returned 0 after 16 usecs
calling mod_init+0x0/0x1d0 @ 1
initcall mod_init+0x0/0x1d0 returned -19 after 21 usecs
calling virtio_rng_driver_init+0x0/0xc @ 1
initcall virtio_rng_driver_init+0x0/0xc returned 0 after 2 usecs
calling cn_proc_init+0x0/0x37 @ 1
initcall cn_proc_init+0x0/0x37 returned 0 after 0 usecs
calling topology_sysfs_init+0x0/0x30 @ 1
initcall topology_sysfs_init+0x0/0x30 returned 0 after 14 usecs
calling cacheinfo_sysfs_init+0x0/0x27 @ 1
initcall cacheinfo_sysfs_init+0x0/0x27 returned 172 after 301 usecs
calling devcoredump_init+0x0/0x13 @ 1
initcall devcoredump_init+0x0/0x13 returned 0 after 2 usecs
calling loop_init+0x0/0x143 @ 1
loop: module loaded
initcall loop_init+0x0/0x143 returned 0 after 510 usecs
calling init_cryptoloop+0x0/0x25 @ 1
initcall init_cryptoloop+0x0/0x25 returned 0 after 0 usecs
calling init+0x0/0x80 @ 1
initcall init+0x0/0x80 returned 0 after 17 usecs
calling intel_lpss_init+0x0/0x1c @ 1
initcall intel_lpss_init+0x0/0x1c returned 0 after 0 usecs
calling intel_lpss_pci_driver_init+0x0/0x15 @ 1
initcall intel_lpss_pci_driver_init+0x0/0x15 returned 0 after 17 usecs
calling intel_lpss_acpi_driver_init+0x0/0xe @ 1
initcall intel_lpss_acpi_driver_init+0x0/0xe returned 0 after 4 usecs
calling intel_soc_pmic_i2c_driver_init+0x0/0xe @ 1
initcall intel_soc_pmic_i2c_driver_init+0x0/0xe returned 0 after 2 usecs
calling raid_init+0x0/0xc @ 1
initcall raid_init+0x0/0xc returned 0 after 1 usecs
calling spi_transport_init+0x0/0x7f @ 1
initcall spi_transport_init+0x0/0x7f returned 0 after 3 usecs
calling fc_transport_init+0x0/0x7d @ 1
initcall fc_transport_init+0x0/0x7d returned 0 after 4 usecs
calling sas_transport_init+0x0/0xb3 @ 1
initcall sas_transport_init+0x0/0xb3 returned 0 after 6 usecs
calling sas_class_init+0x0/0x3a @ 1
initcall sas_class_init+0x0/0x3a returned 0 after 0 usecs
calling libfc_init+0x0/0x30 @ 1
initcall libfc_init+0x0/0x30 returned 0 after 91 usecs
calling blogic_init+0x0/0xfc0 @ 1
initcall blogic_init+0x0/0xfc0 returned 0 after 23 usecs
calling isci_init+0x0/0x69 @ 1
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
initcall isci_init+0x0/0x69 returned 0 after 7 usecs
calling hpsa_init+0x0/0x4f @ 1
initcall hpsa_init+0x0/0x4f returned 0 after 15 usecs
calling pqi_init+0x0/0xdc @ 1
Microsemi PQI Driver (v1.1.2-126)
initcall pqi_init+0x0/0xdc returned 0 after 7 usecs
calling megasas_init+0x0/0x1d6 @ 1
megasas: 07.703.05.00-rc1
initcall megasas_init+0x0/0x1d6 returned 0 after 7 usecs
calling _mpt3sas_init+0x0/0x1bc @ 1
mpt3sas version 17.100.00.00 loaded
initcall _mpt3sas_init+0x0/0x1bc returned 0 after 34 usecs
calling init+0x0/0xd2 @ 1
initcall init+0x0/0xd2 returned 0 after 5 usecs
calling pvscsi_init+0x0/0x2f @ 1
VMware PVSCSI driver - version 1.0.7.0-k
initcall pvscsi_init+0x0/0x2f returned 0 after 5 usecs
calling init_sd+0x0/0x173 @ 1
initcall init_sd+0x0/0x173 returned 0 after 7 usecs
calling init_sg+0x0/0xc2 @ 1
initcall init_sg+0x0/0xc2 returned 0 after 1 usecs
calling nvme_core_init+0x0/0xd3 @ 1
initcall nvme_core_init+0x0/0xd3 returned 0 after 83 usecs
calling nvme_init+0x0/0x15 @ 1
initcall nvme_init+0x0/0x15 returned 0 after 9 usecs
calling ahci_pci_driver_init+0x0/0x15 @ 1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xdea39000 port 0xdea39180 irq 26
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xde810000 port 0xde810100 irq 27
ata8: SATA max UDMA/133 abar m512@0xde810000 port 0xde810180 irq 27
initcall ahci_pci_driver_init+0x0/0x15 returned 0 after 1601 usecs
calling ahci_driver_init+0x0/0xe @ 1
initcall ahci_driver_init+0x0/0xe returned 0 after 7 usecs
calling piix_init+0x0/0x2a @ 1
initcall piix_init+0x0/0x2a returned 0 after 10 usecs
calling sch_pci_driver_init+0x0/0x15 @ 1
initcall sch_pci_driver_init+0x0/0x15 returned 0 after 7 usecs
calling mpiix_pci_driver_init+0x0/0x15 @ 1
initcall mpiix_pci_driver_init+0x0/0x15 returned 0 after 7 usecs
calling ata_generic_pci_driver_init+0x0/0x15 @ 1
initcall ata_generic_pci_driver_init+0x0/0x15 returned 0 after 5 usecs
calling drm_kms_helper_init+0x0/0x12 @ 1
initcall drm_kms_helper_init+0x0/0x12 returned 0 after 0 usecs
calling drm_core_init+0x0/0xe8 @ 1
initcall drm_core_init+0x0/0xe8 returned 0 after 4 usecs
calling ttm_init+0x0/0x63 @ 1
initcall ttm_init+0x0/0x63 returned 0 after 5 usecs
calling i915_init+0x0/0x55 @ 1
[drm] Memory usable by graphics device = 2048M
checking generic (70000000 300000) vs hw (70000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:16: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
initcall i915_init+0x0/0x55 returned 0 after 12372 usecs
calling cirrus_init+0x0/0x3c @ 1
initcall cirrus_init+0x0/0x3c returned 0 after 6 usecs
calling bochs_init+0x0/0x3c @ 1
initcall bochs_init+0x0/0x3c returned 0 after 5 usecs
calling virtio_gpu_driver_init+0x0/0xc @ 1
initcall virtio_gpu_driver_init+0x0/0xc returned 0 after 2 usecs
calling net_olddevs_init+0x0/0x5e @ 1
initcall net_olddevs_init+0x0/0x5e returned 0 after 1 usecs
calling tun_init+0x0/0xa0 @ 1
tun: Universal TUN/TAP device driver, 1.6
initcall tun_init+0x0/0xa0 returned 0 after 88 usecs
calling e100_init_module+0x0/0x53 @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x53 returned 0 after 11 usecs
calling fusion_init+0x0/0xf1 @ 1
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
initcall fusion_init+0x0/0xf1 returned 0 after 2 usecs
calling mptspi_init+0x0/0xed @ 1
Fusion MPT SPI Host driver 3.04.20
initcall mptspi_init+0x0/0xed returned 0 after 6 usecs
calling mptsas_init+0x0/0x129 @ 1
Fusion MPT SAS Host driver 3.04.20
initcall mptsas_init+0x0/0x129 returned 0 after 6 usecs
calling ehci_hcd_init+0x0/0xc5 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
initcall ehci_hcd_init+0x0/0xc5 returned 0 after 2 usecs
calling ehci_pci_init+0x0/0x66 @ 1
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdea3b000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.7-536.native ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdea3a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.7-536.native ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
initcall ehci_pci_init+0x0/0x66 returned 0 after 21315 usecs
calling uhci_hcd_init+0x0/0x11a @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0x11a returned 0 after 9 usecs
calling xhci_hcd_init+0x0/0x1a @ 1
initcall xhci_hcd_init+0x0/0x1a returned 0 after 0 usecs
calling xhci_pci_init+0x0/0x3e @ 1
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.7-536.native xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.7-536.native xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
initcall xhci_pci_init+0x0/0x3e returned 0 after 4587 usecs
calling usb_storage_driver_init+0x0/0x2a @ 1
usbcore: registered new interface driver usb-storage
initcall usb_storage_driver_init+0x0/0x2a returned 0 after 10 usecs
calling evdev_init+0x0/0xc @ 1
initcall evdev_init+0x0/0xc returned 0 after 167 usecs
calling rmi_bus_init+0x0/0xd8 @ 1
initcall rmi_bus_init+0x0/0xd8 returned 0 after 31 usecs
calling cmos_init+0x0/0x6d @ 1
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x6d returned 0 after 151 usecs
calling acpi_smbus_cmi_driver_init+0x0/0xc @ 1
initcall acpi_smbus_cmi_driver_init+0x0/0xc returned 0 after 13 usecs
calling dw_i2c_driver_init+0x0/0x15 @ 1
initcall dw_i2c_driver_init+0x0/0x15 returned 0 after 6 usecs
calling acpi_power_meter_init+0x0/0x35 @ 1
initcall acpi_power_meter_init+0x0/0x35 returned 0 after 12 usecs
calling coretemp_init+0x0/0xbc @ 1
initcall coretemp_init+0x0/0xbc returned 0 after 194 usecs
calling powerclamp_init+0x0/0x1fa @ 1
initcall powerclamp_init+0x0/0x1fa returned 0 after 22 usecs
calling pkg_temp_thermal_init+0x0/0x124 @ 1
initcall pkg_temp_thermal_init+0x0/0x124 returned 0 after 161 usecs
calling raid0_init+0x0/0xc @ 1
initcall raid0_init+0x0/0xc returned 0 after 0 usecs
calling raid_init+0x0/0xc @ 1
initcall raid_init+0x0/0xc returned 0 after 0 usecs
calling raid_init+0x0/0xc @ 1
initcall raid_init+0x0/0xc returned 0 after 0 usecs
calling dm_init+0x0/0x42 @ 1
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
initcall dm_init+0x0/0x42 returned 0 after 43 usecs
calling dm_crypt_init+0x0/0x29 @ 1
initcall dm_crypt_init+0x0/0x29 returned 0 after 0 usecs
calling cpufreq_gov_dbs_init+0x0/0xc @ 1
initcall cpufreq_gov_dbs_init+0x0/0xc returned 0 after 0 usecs
calling intel_pstate_init+0x0/0x315 @ 1
intel_pstate: Intel P-state driver initializing
initcall intel_pstate_init+0x0/0x315 returned 0 after 148 usecs
calling mmc_blk_init+0x0/0xed @ 1
initcall mmc_blk_init+0x0/0xed returned 0 after 6 usecs
calling sdhci_drv_init+0x0/0x1d @ 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
initcall sdhci_drv_init+0x0/0x1d returned 0 after 0 usecs
calling sdhci_driver_init+0x0/0x15 @ 1
initcall sdhci_driver_init+0x0/0x15 returned 0 after 7 usecs
calling sdhci_acpi_driver_init+0x0/0xe @ 1
initcall sdhci_acpi_driver_init+0x0/0xe returned 0 after 4 usecs
calling dmi_sysfs_init+0x0/0x9f @ 1
initcall dmi_sysfs_init+0x0/0x9f returned 0 after 145 usecs
calling efivars_sysfs_init+0x0/0x210 @ 1
EFI Variables Facility v0.08 2004-May-17
initcall efivars_sysfs_init+0x0/0x210 returned 0 after 23268 usecs
calling esrt_sysfs_init+0x0/0x2d4 @ 1
initcall esrt_sysfs_init+0x0/0x2d4 returned -38 after 0 usecs
calling efivars_pstore_init+0x0/0x9b @ 1
pstore: using zlib compression
pstore: Registered efi as persistent store backend
initcall efivars_pstore_init+0x0/0x9b returned 0 after 2 usecs
calling efibc_init+0x0/0x35 @ 1
initcall efibc_init+0x0/0x35 returned 0 after 0 usecs
calling efi_capsule_loader_init+0x0/0x35 @ 1
initcall efi_capsule_loader_init+0x0/0x35 returned 0 after 18 usecs
calling hid_init+0x0/0x5a @ 1
hidraw: raw HID events driver (C) Jiri Kosina
initcall hid_init+0x0/0x5a returned 0 after 7 usecs
calling hid_generic_init+0x0/0x15 @ 1
initcall hid_generic_init+0x0/0x15 returned 0 after 3 usecs
calling belkin_driver_init+0x0/0x15 @ 1
initcall belkin_driver_init+0x0/0x15 returned 0 after 2 usecs
calling ch_driver_init+0x0/0x15 @ 1
initcall ch_driver_init+0x0/0x15 returned 0 after 2 usecs
calling ch_driver_init+0x0/0x15 @ 1
initcall ch_driver_init+0x0/0x15 returned 0 after 2 usecs
calling holtek_kbd_driver_init+0x0/0x15 @ 1
initcall holtek_kbd_driver_init+0x0/0x15 returned 0 after 2 usecs
calling holtek_mouse_driver_init+0x0/0x15 @ 1
initcall holtek_mouse_driver_init+0x0/0x15 returned 0 after 2 usecs
calling holtek_driver_init+0x0/0x15 @ 1
initcall holtek_driver_init+0x0/0x15 returned 0 after 2 usecs
calling ks_driver_init+0x0/0x15 @ 1
initcall ks_driver_init+0x0/0x15 returned 0 after 2 usecs
calling lenovo_driver_init+0x0/0x15 @ 1
initcall lenovo_driver_init+0x0/0x15 returned 0 after 2 usecs
calling lg_driver_init+0x0/0x15 @ 1
initcall lg_driver_init+0x0/0x15 returned 0 after 4 usecs
calling ms_driver_init+0x0/0x15 @ 1
initcall ms_driver_init+0x0/0x15 returned 0 after 2 usecs
calling samsung_driver_init+0x0/0x15 @ 1
initcall samsung_driver_init+0x0/0x15 returned 0 after 2 usecs
calling hid_init+0x0/0x4b @ 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0x4b returned 0 after 5 usecs
calling ips_pci_driver_init+0x0/0x15 @ 1
initcall ips_pci_driver_init+0x0/0x15 returned 0 after 4 usecs
calling pmc_atom_init+0x0/0x264 @ 1
initcall pmc_atom_init+0x0/0x264 returned -19 after 2 usecs
calling extcon_class_init+0x0/0x12 @ 1
initcall extcon_class_init+0x0/0x12 returned 0 after 1 usecs
calling powercap_init+0x0/0x2a4 @ 1
initcall powercap_init+0x0/0x2a4 returned 0 after 23 usecs
calling rapl_init+0x0/0x204 @ 1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
initcall rapl_init+0x0/0x204 returned 0 after 128 usecs
calling pm_check_save_msr+0x0/0x20 @ 1
initcall pm_check_save_msr+0x0/0x20 returned 0 after 0 usecs
calling sock_diag_init+0x0/0x2f @ 1
initcall sock_diag_init+0x0/0x2f returned 0 after 11 usecs
calling llc_init+0x0/0x1d @ 1
initcall llc_init+0x0/0x1d returned 0 after 0 usecs
calling snap_init+0x0/0x39 @ 1
initcall snap_init+0x0/0x39 returned 0 after 0 usecs
calling blackhole_init+0x0/0xc @ 1
initcall blackhole_init+0x0/0xc returned 0 after 0 usecs
calling cbq_module_init+0x0/0xc @ 1
initcall cbq_module_init+0x0/0xc returned 0 after 0 usecs
calling multiq_module_init+0x0/0xc @ 1
initcall multiq_module_init+0x0/0xc returned 0 after 0 usecs
calling codel_module_init+0x0/0xc @ 1
initcall codel_module_init+0x0/0xc returned 0 after 0 usecs
calling fq_codel_module_init+0x0/0xc @ 1
initcall fq_codel_module_init+0x0/0xc returned 0 after 0 usecs
calling fq_module_init+0x0/0x57 @ 1
initcall fq_module_init+0x0/0x57 returned 0 after 0 usecs
calling init_cgroup_cls+0x0/0xc @ 1
initcall init_cgroup_cls+0x0/0xc returned 0 after 0 usecs
calling cls_bpf_init_mod+0x0/0xc @ 1
initcall cls_bpf_init_mod+0x0/0xc returned 0 after 0 usecs
calling nfnetlink_init+0x0/0x6e @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x6e returned 0 after 2 usecs
calling nfnl_acct_init+0x0/0x61 @ 1
nfnl_acct: registering with nfnetlink.
initcall nfnl_acct_init+0x0/0x61 returned 0 after 0 usecs
calling nfnetlink_queue_init+0x0/0x95 @ 1
initcall nfnetlink_queue_init+0x0/0x95 returned 0 after 1 usecs
calling nfnetlink_log_init+0x0/0x99 @ 1
initcall nfnetlink_log_init+0x0/0x99 returned 0 after 1 usecs
calling xt_init+0x0/0x108 @ 1
initcall xt_init+0x0/0x108 returned 0 after 0 usecs
calling tcpudp_mt_init+0x0/0x11 @ 1
initcall tcpudp_mt_init+0x0/0x11 returned 0 after 0 usecs
calling mark_mt_init+0x0/0x3d @ 1
initcall mark_mt_init+0x0/0x3d returned 0 after 0 usecs
calling ip_set_init+0x0/0xa0 @ 1
ip_set: protocol 6
initcall ip_set_init+0x0/0xa0 returned 0 after 1 usecs
calling hash_ip_init+0x0/0xc @ 1
initcall hash_ip_init+0x0/0xc returned 0 after 0 usecs
calling gre_offload_init+0x0/0x48 @ 1
initcall gre_offload_init+0x0/0x48 returned 0 after 0 usecs
calling sysctl_ipv4_init+0x0/0x4d @ 1
initcall sysctl_ipv4_init+0x0/0x4d returned 0 after 23 usecs
calling bbr_register+0x0/0xc @ 1
initcall bbr_register+0x0/0xc returned 0 after 0 usecs
calling xfrm_user_init+0x0/0x45 @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x45 returned 0 after 1 usecs
calling inet6_init+0x0/0x350 @ 1
NET: Registered protocol family 10
Segment Routing with IPv6
initcall inet6_init+0x0/0x350 returned 0 after 179 usecs
calling packet_init+0x0/0x41 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x41 returned 0 after 1 usecs
calling packet_diag_init+0x0/0xc @ 1
initcall packet_diag_init+0x0/0xc returned 0 after 0 usecs
calling br_init+0x0/0xcd @ 1
initcall br_init+0x0/0xcd returned 0 after 2 usecs
calling br_netfilter_init+0x0/0xad @ 1
Bridge firewalling registered
initcall br_netfilter_init+0x0/0xad returned 0 after 2 usecs
calling ebtables_init+0x0/0x49 @ 1
Ebtables v2.0 registered
initcall ebtables_init+0x0/0x49 returned 0 after 0 usecs
calling ebtable_broute_init+0x0/0x20 @ 1
initcall ebtable_broute_init+0x0/0x20 returned 0 after 2 usecs
calling ebtable_filter_init+0x0/0xc @ 1
initcall ebtable_filter_init+0x0/0xc returned 0 after 74 usecs
calling ebtable_nat_init+0x0/0xc @ 1
initcall ebtable_nat_init+0x0/0xc returned 0 after 30 usecs
calling ebt_802_3_init+0x0/0xc @ 1
initcall ebt_802_3_init+0x0/0xc returned 0 after 0 usecs
calling ebt_among_init+0x0/0xc @ 1
initcall ebt_among_init+0x0/0xc returned 0 after 0 usecs
calling ebt_arp_init+0x0/0xc @ 1
initcall ebt_arp_init+0x0/0xc returned 0 after 0 usecs
calling ebt_ip_init+0x0/0xc @ 1
initcall ebt_ip_init+0x0/0xc returned 0 after 0 usecs
calling ebt_ip6_init+0x0/0xc @ 1
initcall ebt_ip6_init+0x0/0xc returned 0 after 0 usecs
calling ebt_limit_init+0x0/0xc @ 1
initcall ebt_limit_init+0x0/0xc returned 0 after 0 usecs
calling ebt_mark_m_init+0x0/0xc @ 1
initcall ebt_mark_m_init+0x0/0xc returned 0 after 0 usecs
calling ebt_pkttype_init+0x0/0xc @ 1
initcall ebt_pkttype_init+0x0/0xc returned 0 after 0 usecs
calling ebt_stp_init+0x0/0xc @ 1
initcall ebt_stp_init+0x0/0xc returned 0 after 0 usecs
calling ebt_vlan_init+0x0/0x26 @ 1
initcall ebt_vlan_init+0x0/0x26 returned 0 after 0 usecs
calling ebt_arpreply_init+0x0/0xc @ 1
initcall ebt_arpreply_init+0x0/0xc returned 0 after 0 usecs
calling ebt_mark_init+0x0/0xc @ 1
initcall ebt_mark_init+0x0/0xc returned 0 after 0 usecs
calling ebt_dnat_init+0x0/0xc @ 1
initcall ebt_dnat_init+0x0/0xc returned 0 after 0 usecs
calling ebt_redirect_init+0x0/0xc @ 1
initcall ebt_redirect_init+0x0/0xc returned 0 after 0 usecs
calling ebt_snat_init+0x0/0xc @ 1
initcall ebt_snat_init+0x0/0xc returned 0 after 0 usecs
calling ebt_log_init+0x0/0xc @ 1
initcall ebt_log_init+0x0/0xc returned 0 after 0 usecs
calling ebt_nflog_init+0x0/0xc @ 1
initcall ebt_nflog_init+0x0/0xc returned 0 after 0 usecs
calling dcbnl_init+0x0/0x53 @ 1
initcall dcbnl_init+0x0/0x53 returned 0 after 0 usecs
calling mcheck_init_device+0x0/0x138 @ 1
initcall mcheck_init_device+0x0/0x138 returned 0 after 192 usecs
calling dev_mcelog_init_device+0x0/0x4a @ 1
initcall dev_mcelog_init_device+0x0/0x4a returned 0 after 18 usecs
calling intel_rdt_late_init+0x0/0x4ac @ 1
initcall intel_rdt_late_init+0x0/0x4ac returned -19 after 0 usecs
calling mcheck_late_init+0x0/0x76 @ 1
initcall mcheck_late_init+0x0/0x76 returned 0 after 1 usecs
calling severities_debugfs_init+0x0/0x41 @ 1
initcall severities_debugfs_init+0x0/0x41 returned 0 after 1 usecs
calling threshold_init_device+0x0/0x4a @ 1
initcall threshold_init_device+0x0/0x4a returned 0 after 0 usecs
calling microcode_init+0x0/0x1de @ 1
microcode: sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.2.
initcall microcode_init+0x0/0x1de returned 0 after 55 usecs
calling hpet_insert_resource+0x0/0x22 @ 1
initcall hpet_insert_resource+0x0/0x22 returned 0 after 0 usecs
calling update_mp_table+0x0/0x4f2 @ 1
initcall update_mp_table+0x0/0x4f2 returned 0 after 0 usecs
calling lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 usecs
calling print_ICs+0x0/0x190 @ 1
initcall print_ICs+0x0/0x190 returned 0 after 0 usecs
calling pat_memtype_list_init+0x0/0x38 @ 1
initcall pat_memtype_list_init+0x0/0x38 returned 0 after 0 usecs
calling create_tlb_single_page_flush_ceiling+0x0/0x2f @ 1
initcall create_tlb_single_page_flush_ceiling+0x0/0x2f returned 0 after 0 usecs
calling aesni_init+0x0/0x207 @ 1
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
initcall aesni_init+0x0/0x207 returned 0 after 354 usecs
calling init_oops_id+0x0/0x40 @ 1
initcall init_oops_id+0x0/0x40 returned 0 after 0 usecs
calling sched_clock_init_late+0x0/0x94 @ 1
sched_clock: Marking stable (298493311, 0)->(425221522, -126728211)
initcall sched_clock_init_late+0x0/0x94 returned 0 after 63 usecs
calling sched_init_debug+0x0/0x44 @ 1
initcall sched_init_debug+0x0/0x44 returned 0 after 1 usecs
calling pm_qos_power_init+0x0/0xb3 @ 1
initcall pm_qos_power_init+0x0/0xb3 returned 0 after 53 usecs
calling pm_debugfs_init+0x0/0x2a @ 1
initcall pm_debugfs_init+0x0/0x2a returned 0 after 0 usecs
calling printk_late_init+0x0/0x12b @ 1
initcall printk_late_init+0x0/0x12b returned 0 after 0 usecs
calling tk_debug_sleep_time_init+0x0/0x42 @ 1
initcall tk_debug_sleep_time_init+0x0/0x42 returned 0 after 0 usecs
calling taskstats_init+0x0/0x36 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x36 returned 0 after 2 usecs
calling load_system_certificate_list+0x0/0xf3 @ 1
Loading compiled-in X.509 certificates
clr: call_modprobe: crypto-pkcs1pad(rsa,sha512) 2
clr: call_modprobe: crypto-pkcs1pad(rsa,sha512)-all 2
Loaded X.509 cert 'Build time autogenerated kernel key: 9d6f9cc6aedc94fbcd051bdcce02f0db06c63fae'
initcall load_system_certificate_list+0x0/0xf3 returned 0 after 592 usecs
calling fault_around_debugfs+0x0/0x3b @ 1
initcall fault_around_debugfs+0x0/0x3b returned 0 after 2 usecs
calling max_swapfiles_check+0x0/0x3 @ 1
initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs
calling split_huge_pages_debugfs+0x0/0x3b @ 1
initcall split_huge_pages_debugfs+0x0/0x3b returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x3a @ 1
initcall check_early_ioremap_leak+0x0/0x3a returned 0 after 0 usecs
calling init_btrfs_fs+0x0/0x128 @ 1
Btrfs loaded, crc32c=crc32c-intel
initcall init_btrfs_fs+0x0/0x128 returned 0 after 76 usecs
calling init_root_keyring+0x0/0x5 @ 1
initcall init_root_keyring+0x0/0x5 returned 0 after 4 usecs
calling prandom_reseed+0x0/0x2c @ 1
initcall prandom_reseed+0x0/0x2c returned 0 after 2 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x13 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x13 returned 0 after 0 usecs
calling pci_sysfs_init+0x0/0x51 @ 1
initcall pci_sysfs_init+0x0/0x51 returned 0 after 466 usecs
calling bert_init+0x0/0x21b @ 1
initcall bert_init+0x0/0x21b returned 0 after 0 usecs
calling clk_debug_init+0x0/0x144 @ 1
initcall clk_debug_init+0x0/0x144 returned 0 after 3 usecs
calling dmar_free_unused_resources+0x0/0xba @ 1
initcall dmar_free_unused_resources+0x0/0xba returned 0 after 0 usecs
calling deferred_probe_initcall+0x0/0x30 @ 1
initcall deferred_probe_initcall+0x0/0x30 returned 0 after 6 usecs
calling acpi_cpufreq_init+0x0/0x1f5 @ 1
initcall acpi_cpufreq_init+0x0/0x1f5 returned -17 after 0 usecs
calling firmware_memmap_init+0x0/0x30 @ 1
initcall firmware_memmap_init+0x0/0x30 returned 0 after 27 usecs
calling efi_shutdown_init+0x0/0x39 @ 1
initcall efi_shutdown_init+0x0/0x39 returned 0 after 0 usecs
calling itmt_legacy_init+0x0/0x54 @ 1
initcall itmt_legacy_init+0x0/0x54 returned -19 after 0 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x50 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x50 returned 0 after 0 usecs
calling tcp_congestion_default+0x0/0x13 @ 1
initcall tcp_congestion_default+0x0/0x13 returned 0 after 0 usecs
calling clear_boot_tracer+0x0/0x2a @ 1
initcall clear_boot_tracer+0x0/0x2a returned 0 after 0 usecs
calling clk_disable_unused+0x0/0x170 @ 1
initcall clk_disable_unused+0x0/0x170 returned 0 after 0 usecs
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
usb 4-3: New USB device found, idVendor=045b, idProduct=0210
usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 4 ports detected
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:3.
usb 1-1: New USB device found, idVendor=8087, idProduct=8009
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-3: new high-speed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=8001
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
devtmpfs: mounted
Freeing unused kernel memory: 1132K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel memory: 1976K
Freeing unused kernel memory: 688K
usb 3-3: New USB device found, idVendor=045b, idProduct=0209
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
usb 3-3.3: new low-speed USB device number 3 using xhci_hcd
usb 3-3.3: New USB device found, idVendor=413c, idProduct=2107
usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.3: Product: Dell USB Entry Keyboard
usb 3-3.3: Manufacturer: Dell
input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.0/0003:413C:2107.0001/input/input4
tsc: Refined TSC clocksource calibration: 3599.997 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4505a81e, max_idle_ns: 440795320847 ns
clocksource: Switched to clocksource tsc
hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-3.3/input0
usb 3-3.4: new low-speed USB device number 4 using xhci_hcd
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=legacy)
usb 3-3.4: New USB device found, idVendor=03f0, idProduct=094a
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.4: Product: HP USB Optical Mouse
usb 3-3.4: Manufacturer: PixArt
input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/0003:03F0:094A.0002/input/input5
hid-generic 0003:03F0:094A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-3.4/input0
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
clr: call_modprobe: net-pf-16-proto-9 2
systemd-journald[269]: Received request to flush runtime journal from PID 1
calling fuse_init+0x0/0x1ae [fuse] @ 291
fuse init (API version 7.26)
initcall fuse_init+0x0/0x1ae [fuse] returned 0 after 46 usecs
calling i2c_i801_init+0x0/0x1000 [i2c_i801] @ 307
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
initcall i2c_i801_init+0x0/0x1000 [i2c_i801] returned 0 after 2135 usecs
calling lpc_ich_driver_init+0x0/0x1000 [lpc_ich] @ 314
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
initcall lpc_ich_driver_init+0x0/0x1000 [lpc_ich] returned 0 after 65 usecs
calling e1000_init_module+0x0/0x1000 [e1000e] @ 304
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic mode
calling init_soundcore+0x0/0x1000 [soundcore] @ 300
initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 2 usecs
calling shpcd_init+0x0/0x1000 [shpchp] @ 309
calling acpi_wmi_init+0x0/0x1000 [wmi] @ 308
calling alsa_sound_init+0x0/0x88 [snd] @ 300
initcall alsa_sound_init+0x0/0x88 [snd] returned 0 after 4 usecs
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
calling alsa_pcm_init+0x0/0x6d [snd_pcm] @ 305
initcall alsa_pcm_init+0x0/0x6d [snd_pcm] returned 0 after 1 usecs
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d4:35:e5:05:71
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
initcall e1000_init_module+0x0/0x1000 [e1000e] returned 0 after 139161 usecs
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 128145 usecs
initcall acpi_wmi_init+0x0/0x1000 [wmi] returned 0 after 120141 usecs
e1000e 0000:00:19.0 eno1: renamed from eth0
calling intel_wmi_thunderbolt_driver_init+0x0/0x1000 [intel_wmi_thunderbolt] @ 310
initcall intel_wmi_thunderbolt_driver_init+0x0/0x1000 [intel_wmi_thunderbolt] returned 0 after 22 usecs
calling hda_bus_init+0x0/0xc [snd_hda_core] @ 305
initcall hda_bus_init+0x0/0xc [snd_hda_core] returned 0 after 4 usecs
calling mxm_wmi_init+0x0/0x1000 [mxm_wmi] @ 308
initcall mxm_wmi_init+0x0/0x1000 [mxm_wmi] returned 0 after 0 usecs
calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 300
initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 1 usecs
calling azx_driver_init+0x0/0xfca [snd_hda_intel] @ 300
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
clr: call_modprobe: i915 2
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
initcall azx_driver_init+0x0/0xfca [snd_hda_intel] returned 0 after 283 usecs
clr: call_modprobe: hdaudio:v10EC0900r00100001a01
2
clr: call_modprobe: hdaudio:v80862807r00100000a01
2
calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 313
initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 1498 usecs
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 305
initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 6 usecs
calling nvmem_init+0x0/0x1000 [nvmem_core] @ 303
initcall nvmem_init+0x0/0x1000 [nvmem_core] returned 0 after 4 usecs
calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 305
snd_hda_codec_realtek hdaudioC1D2: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC1D2: inputs:
snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 12526 usecs
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
calling nhi_init+0x0/0x1000 [thunderbolt] @ 303
thunderbolt 0000:0a:00.0: NHI initialized, starting thunderbolt
thunderbolt 0000:0a:00.0: allocating TX ring 0 of size 10
thunderbolt 0000:0a:00.0: allocating RX ring 0 of size 10
thunderbolt 0000:0a:00.0: control channel created
thunderbolt 0000:0a:00.0: control channel starting...
thunderbolt 0000:0a:00.0: starting TX ring 0
thunderbolt 0000:0a:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
thunderbolt 0000:0a:00.0: starting RX ring 0
thunderbolt 0000:0a:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
thunderbolt 0000:0a:00.0: current switch config:
thunderbolt 0000:0a:00.0: Switch: 8086:156d (Revision: 0, TB Version: 1)
thunderbolt 0000:0a:00.0: Max Port Number: 12
thunderbolt 0000:0a:00.0: Config:
thunderbolt 0000:0a:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
thunderbolt 0000:0a:00.0: unknown1: 0x0 unknown4: 0x0
thunderbolt 0000:0a:00.0: 0: uid: 0x0
thunderbolt 0000:0a:00.0: Port 0: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 7/7
thunderbolt 0000:0a:00.0: Max counters: 8
thunderbolt 0000:0a:00.0: NFC Credits: 0x700000
thunderbolt 0000:0a:00.0: Port 1: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:0a:00.0: Max counters: 16
thunderbolt 0000:0a:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:0a:00.0: Port 2: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:0a:00.0: Max counters: 16
thunderbolt 0000:0a:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:0a:00.0: Port 3: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:0a:00.0: Max counters: 16
thunderbolt 0000:0a:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:0a:00.0: Port 4: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:0a:00.0: Max counters: 16
thunderbolt 0000:0a:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:0a:00.0: Port 5: 8086:156d (Revision: 0, TB Version: 1, Type: NHI (0x2))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 11/11
thunderbolt 0000:0a:00.0: Max counters: 16
thunderbolt 0000:0a:00.0: NFC Credits: 0xf00000
thunderbolt 0000:0a:00.0: Port 6: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:0a:00.0: Max counters: 2
thunderbolt 0000:0a:00.0: NFC Credits: 0x700000
thunderbolt 0000:0a:00.0: Port 7: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:0a:00.0: Max counters: 2
thunderbolt 0000:0a:00.0: NFC Credits: 0x700000
thunderbolt 0000:0a:00.0: Port 8: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:0a:00.0: Max counters: 2
thunderbolt 0000:0a:00.0: NFC Credits: 0x700000
thunderbolt 0000:0a:00.0: Port 9: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:0a:00.0: Max counters: 2
thunderbolt 0000:0a:00.0: NFC Credits: 0x700000
thunderbolt 0000:0a:00.0: Port 10: 8086:156d (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0102))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 9/9
thunderbolt 0000:0a:00.0: Max counters: 2
thunderbolt 0000:0a:00.0: NFC Credits: 0x700000
thunderbolt 0000:0a:00.0: Port 11: 8086:156d (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 9/9
thunderbolt 0000:0a:00.0: Max counters: 2
thunderbolt 0000:0a:00.0: NFC Credits: 0xf00000
thunderbolt 0000:0a:00.0: Port 12: 8086:156d (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
thunderbolt 0000:0a:00.0: Max hop id (in/out): 9/9
thunderbolt 0000:0a:00.0: Max counters: 2
thunderbolt 0000:0a:00.0: NFC Credits: 0xf00000
initcall nhi_init+0x0/0x1000 [thunderbolt] returned 0 after 15894 usecs
Adding 32764k swap on /dev/sda2. Priority:-2 extents:1 across:32764k
microcode: updated to revision 0x22, date = 2017-01-27
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
calling ip_tables_init+0x0/0x1000 [ip_tables] @ 19610
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 4 usecs
clr: call_modprobe: ipt_set 2
calling xt_set_init+0x0/0x1000 [xt_set] @ 19611
initcall xt_set_init+0x0/0x1000 [xt_set] returned 0 after 0 usecs
clr: call_modprobe: iptable_filter 2
calling iptable_filter_init+0x0/0x1000 [iptable_filter] @ 19619
initcall iptable_filter_init+0x0/0x1000 [iptable_filter] returned 0 after 26645 usecs
calling ip6_tables_init+0x0/0x1000 [ip6_tables] @ 19623
ip6_tables: (C) 2000-2006 Netfilter Core Team
initcall ip6_tables_init+0x0/0x1000 [ip6_tables] returned 0 after 4 usecs
clr: call_modprobe: ip6table_filter 2
calling ip6table_filter_init+0x0/0x1000 [ip6table_filter] @ 19629
initcall ip6table_filter_init+0x0/0x1000 [ip6table_filter] returned 0 after 24741 usecs